Noob 1.3 Lite multiboot image

Downloaded the Lite version of the new Noob 1.3 raspberry pi image.

Things i like:  Super fast download and super fast copy to SD card. Basically your just getting the NOOB software and NO images. So if you didn’t want to use the raw image or you like the NOOB bootup options but you only want ONE iso type, this is a nice way to go and is probably faster than the full NOOB download.  The multiboot options is super nice too. I haven’t checked to see how much space it gives each os, but as the video below shows it JUST WORKS. So instead of swapping out a bunch of SD cards to try different setups you can have one big card and just choose what you want. Really great. Also, you will obviously always have the most up to date ISO.

What i didnt like: Really really long time to download and install. No way to choose from where you are getting images when you download. I think if speed in setting up is important to you, using lite is NOT the way to go. Your basically trading time for convenience.

Overall i like the new setup and will probably use it from now on mainly as I will no longer have to keep track of and download the most recent images.

XBMC on Model A

Raspberry Model A

I was interested to see if the Raspberry PI Model A board could run XBMC. From looking at the RAM and CPU specifications you may wonder why i am interested in this at all. People have been running XBMC on the previous board which only had 256 megs of ram, so of course it will run. The issue isn’t a ram or cpu issue. It’s the fact that there is not any LAN connections and it only has one usb port. Seeing as i do not have a powered usb hub i could either have a usb keyboard or a wi-fi adapter. Not both.

The solution i came up with was to get it fully setup on the B board and than just move the SD card over.

After installing raspbmc, I attempted to install wicd-curses, which failed repeatedly. I then tried installing the Edimax drivers manually, with almost the exact same issues as wicd-curses. After a little bit of research I found a post that mentioned that openlec has the wifi settings built into the os. So after rebooting to NOOB and copying openlec over I was able to get wi-fi running.

The last step was to make sure i could remotely control XBMC from my iPhone app.

After that it really was as simple as just moving the sd card over the model A and turning it on. Aside from a very slightly increased delay in remote button press to activation, it works really really well.

Only issue is if the wi-fi settings change you lose your remote control to change settings.

Star-Made – Ubuntu Server Install

starmade-screenshot-0000

Star-Made (star-made.org) is a Minecraft style game in space where you create spaceships and explore the universe. It is currently in alpha and is free to play. And like Minecraft it runs on java, so it works on most operating systems. This tut is for installing and running the server, but the single player client files are also installed so you could play it also in that mode if you wanted.

Note 1: this will not run well enough to use on a raspberry pi, at least not without a lot of tweaking. Note 2: These instructions are based off my installing on Ubuntu Server 12.04, 32b version.

#As always update/upgrade your server before hand

  • sudo apt-get update
  • sudo apt-get upgrade -y

#Install java

  • sudo apt-get install -y openjdk-7-jre

#Create directory to hold games files

  • cd
  • mkdir games
  • cd games

#download jar file

  • sudo wget http://files.star-made.org/StarMade-Starter.jar

#Run Jar to expand game files

  • sudo java -jar StarMade-Starter.jar -nogui

#make .sh file executable

  • cd StarMade
  • sudo chmod ug+x StarMade-dedicated-server-linux.sh

#startup server for first time to create server.cfg file

  • sudo ./StarMade-dedicated-server-linux.sh

#After first load, stop server and configure settings

  • cntrl-c
  • sudo nano server.cfg

#Get server IP and start Star-Made

  • ifconfig
  • sudo ./StarMade-dedicated-server-linux.sh

Startup the client and connect to it

http://star-made.org

starmade-screenshot-0003starmade-screenshot-0002starmade-screenshot-0001

Raspberry PI – wicd-curses wifi program

Setting up your Pi to connect to wireless AP’s can be a pain at times. wicd-curses is a nice command line program to get this going for you easily. Only issue i have found so far is it doesn’t seem to like accessing the network on both eth0 and wlan0 at the same time. Meaning if your eth0 is on a different subnet than the AP you are connecting to, you will immediately lose connection to your putty session when you tell it to connect to the AP. Other than that, really cool.

#Update and Upgrade your Pi first

  • sudo apt-get update
  • sudo apt-get upgrade -y

#install wicd-curses

  • sudo apt-get install -y wicd-curses

#run it!

  • wicd-curses

#you should see available wifi ssids. Options are listed at the bottom. If you just highlight and hit enter it should connect you right up. I recommend hitting P and adjusting preferences, like auto connect so it reconnects after a reboot.

wicd-curses man page

Raspberry Pi – Edimax EW-7811Un Install

This is my personal experience in getting the Edimax EW-7811Un running with my AT&T Uverse Router.


#Upgrade/Update

  • sudo apt-get update
  • sudo apt-get upgrade

#Shutdown and insert Edimax wifi usb

  • sudo shutdown -h -P now

#Check for usb device connections

  • lsusb

#Configure interface

  • sudo nano /etc/network/interfaces

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

allow-hotplug wlan0
auto wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf

iface default inet dhcp

#Add SSID and Password

  • sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
ssid=”_SSID_”
proto=WPA2  

#or WPA or whatever security your router is using
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk=”_PASSWORD_”
}

#If you are not sure if your device can see the network or you want to confirm the spelling/case of the ssid, use the following command to scan local wifi networks

  • sudo iwlist wlan0 scan

#Raspberry’s included drivers should work. But to upgrade to latest:

  • sudo wget http://dl.dropbox.com/u/80256631/install-rtl8188cus-latest.sh -O /boot/install-rtl8188cus-latest.sh
  • sudo /boot/install-rtl8188cus-latest.sh

#Do a final reboot and check for Ip address

  • ifconfig

Raspberry PI – Install Audio and MPC/MPD

# Install Audio
sudo apt-get -y install alsa-utils mpg321 lame
sudo modprobe snd-bcm2835

# Set audio output to analog (0=auto, 1=analog, 2=HDMI)

# in this example the “1” is the option you would change to 2 if you wanted to use the HDMI jack
sudo amixer cset numid=3 1

# Test Audio
aplay /usr/share/sounds/alsa/Front_Center.wav
speaker-test -t sine -f 440 -c 2 -s 1

#Install MPD and MPC audio players
sudo apt-get install -y mpd mpc
sudo service mpd stop
sudo chmod -R g+w /var/lib/mpd
sudo chmod -R g+w /var/run/mpd

#remove bind to address
sudo nano /etc/mpd.conf

#Find the line that says bind_to_address “localhost”,  and put a # in front of it or remove the entire line

ctrl-x

Y

Enter

#reboot
sudo shutdown -r now