RC Foam Board Update #3

Got the top dihedral wing and Gopro mount installed.



MineOS – Awesomely Easy Minecraft server

Just thought i would let you know about a cool OS you can get for free. It just works. Download the Live disc and boot up on any old pc you have. It installs the base Linux system and a cool front end to make it super easy via HTML to startup and edit your server at any time. You still have access to command line, ssh and ftp. I have been running a craft bukkit server at version 1.6.4 of minecraft for a few months now with no problems.


Dji Phantom Flame Wheel F450 Build

I have been building a quadcopter from scratch. Here are some videos of my build. I will add a parts list in a following post. Purchased parts from hobbyking.com and helipal.com



Begin Soldering Esc to main board


Installing Motors and power system


Installing Naza and main body and arms


Raspberry PI – “Headless” Streaming Radio Build

This is a compilation of various Google searches. A record of the commands i used to turn a raspberry pi model b into a streaming radio player that can be controlled by MPD apps such as the IOS app MPoD. Although these instructions end with the adding of BBC channels 1-6, you can add any stream that is compatible with MPD/MPC.

This is based off the Raspbian “Wheezy” image found here: http://www.raspberrypi.org/

The raw image and the noobs image both work fine.

This is a windows based tut so i used Win32DiskImager to write the image to my SD card.

Once you know the ip of the Raspberry, ssh into it with a program like Putty. If you use the console (screen connected to the raspberry), you will not be able to copy and paste. rc.local is configured to display the IP address on the local console every time it boots up. But you can always type IFCONFIG to find it manually.

Reconnecting with Putty: After each reboot, just click on the putty title bar and “restart”. This way you will not have to keep opening another session and repeatedly typing the IP address.

Putty into Raspberry PI

Username: pi
Password: raspberry

If you have not already done so at the console, enter sudo raspi-config to enter the initial config program

  • Expand the file system
  • Set Hostname to piradio or whatever you want
  • Change the password if you want
  • Go to the Advanced options
    • Enable SSH
    • Update tool
    • Exit to command line

Open each of the following links and copy/paste all the commands in order. Lines with # are comment lines and do not need to be run.

  1. Update and Upgrade Firmware – Some older firmwares have noise “issues” when idling.
  2. Install Audio and MPC/MPD
  3. Add BBC1-6 radio streams and MPC Play Command – or add your own

Setup your mobile device

  1. Install a free MPD app on your mobile device such as MPod on IOS or MPDroid on android. No username/password needed.
  2. If it does not automatically find the device, manually add one using the above HOSTNAME or IP address. I recommend the HOSTNAME as the current setup for IP is DHCP and your IP could possibly change.

Notes: Although it is set to automatically start, sometimes it will not. The simple solution is to just open your mobile app and wait for it to say the station is available and hit play.

If you want to control the player from CLI:

    • MPC : show stats
    • MPC play : umm play
    • MPC stop :  yeah stop
    • MPC help :