XBMC on Model A

Raspberry Model A

I was interested to see if the Raspberry PI Model A board could run XBMC. From looking at the RAM and CPU specifications you may wonder why i am interested in this at all. People have been running XBMC on the previous board which only had 256 megs of ram, so of course it will run. The issue isn’t a ram or cpu issue. It’s the fact that there is not any LAN connections and it only has one usb port. Seeing as i do not have a powered usb hub i could either have a usb keyboard or a wi-fi adapter. Not both.

The solution i came up with was to get it fully setup on the B board and than just move the SD card over.

After installing raspbmc, I attempted to install wicd-curses, which failed repeatedly. I then tried installing the Edimax drivers manually, with almost the exact same issues as wicd-curses. After a little bit of research I found a post that mentioned that openlec has the wifi settings built into the os. So after rebooting to NOOB and copying openlec over I was able to get wi-fi running.

The last step was to make sure i could remotely control XBMC from my iPhone app.

After that it really was as simple as just moving the sd card over the model A and turning it on. Aside from a very slightly increased delay in remote button press to activation, it works really really well.

Only issue is if the wi-fi settings change you lose your remote control to change settings.

Advertisements

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s